FORGOT YOUR DETAILS?

SIL12

The SIL12 model winding machine, which produces wire-type windings with the radial system for cast-resin transformers.
Is suitable for transformers with a maximum capacity of 1250 KVA at 24KV.

SIL16

The SIL16 winding machine is a model that evolved from the SIL12 design and is suitable for transformers having a maximum capacity of 2500KVA in the 24KV class.

SIL24

New winding machine designed for produce HV windings for resin transformers with an innovative technology, using copper or aluminium rectangular wire.

AB1300

This winding machine is used for the construction of windings of HV coils for cast resin transformer with the technology of “disk”.

BT500

The BT500 winding machine is designed and constructed for coils of low-voltage, aluminium and copper foil-type with maximum width of 1.600 mm.

ACCESSORIES

TRIANGULAR PRESSURE UNIT

This equipment is used to keep the external casting mould compressed so that, by maintaining pressure on the rubber in the mould base, it will act as a hydraulic seal in the phase when the resin is still in the liquid form. It is also particularly suitable for keeping moulds perfectly concentric.

TRIMMER FOR CAST-RESIN WINDING EDGES

  • Elimination of the inconvenience of dust accumulation and the need for air-extraction systems
  • Practical and easy to clean
  • Relatively low-cost Transformer Winding Machine single guide

TERMINAL-BOARD MOULD

The terminal-board mould can be produced according to Siltech specifications and standards or according to the client’s drawings.

BASES FOR WINDING

Silmek bases are designed and produced as a structural support for assembly of the casting moulds. A trolley is provided for operations involving the oven.

SPACERS FOR WINDINGS


These elements are perfectly compatible with epoxy-resin coils as they are produced with the same resin formulated for the cast-resin transformer windings.
Supplied already sanded and washed.
Easily superimposed by means of slotting, thereby allowing for an increase in thickness in accordance with electrical requirements.



Available sizes (mm):
  • 15x20
  • 10x20
  • 8x20
  • 6x20

Length of any measure

THERMO-MOULDED POLYESTER



Thermo-moulded and perforated polyester for reticolation of the resin.
Used to create a resin buffer between the winding and the mould.
Thickness sizes: 4 - 5 -6 mm.

Winding machines transformers , transformers winding machines manufacturers, hv winding machine transformer, winding machine power transformer, foil winding machine transformer , diy winding machine transformer, coil winding machine transformer, automatic winding machine transformer, winding machine for distribution transformer, transformer winding machines for sale, transformers winding machines manufacturers, transformers winding machines manufacturers
TOP